如果您对该产品感兴趣的话,可以
产品名称:
数显橡胶硬度计
产品型号:
DD2-D
产品厂商:
苏州众业电子有限公司1
产品文档:
无相关文档
简单介绍
Type D durometer for hard rubber (rubbers in the high hardness range) and plastics
Conforming to JIS K 6253, ASTM D 2240, ISO 7619, DIN53505, and other national and international standards. Used for measuring hard rubbers and plastics.
|
 |
| Indentor |
 | 2.50mm high, Cone-shaped indentor |
|
 |
| Minimum readout value |
| The minimum readout value is 0.2, 1/5 of conventional analog models. |
|
Peak holding function
The peak hold function facilitates the provision of readout on maximum value. Especially useful for accurate hardness measurement of specimens with stress relaxation nature (e.g., those which show a rapid decline immediately after loading). |
|
Timer holding function
With the timer holding function, the measured values may be kept and indicated at any given point in time. |
|
| Interface box |
 | Data may be acquired from BCD output via interface box (IF-DS1) into computer. |
|
|
|
| | Conforming standards | | JIS K 6253
JIS K 7215
ASTM D 2240
ISO 7619
ISO 868
DIN 53505 |
| | | Indentor design (mm) | | 2.50H 30°Cone Tip radius 0.1 |
| | | Spring load mN(g) | | |
| | | Minimum readout value | | 0.2 point |
| | | Central hole of pressure foot (mm) | | Φ3 |
| | | Pressure foot size (mm) | | 44×18(Rectangle) |
| | | Outer dimensions (mm) | | Approx. 78W×40D×101H |
| | | Measuring mode | | | 1. | Peak Hold mode (Measurement of the maximum readout) | | 2. | Timer Hold mode (Time selectable from 8 lengths within the range 0.5 to 4.0 sec. in increments of 0.5 second) | | 3. | Normal mode (Measurement of real time value) |
|
| | | Resetting | | 1. Push-button switch
2. Resetting by external signal
3. Automatic reset after a lapse of 32 seconds after holding |
| | | External output | | BCD parallel output CMOS level, positive logic |
| | | Power source | | Rechargeable nickel-cadmium battery
An AC adaptor for battery charging supplied |
| | | Weight (g) | | 505 |
| | | Application | | Hard rubbers, plastics |
| |
|
| Outer dimensions (mm) |
|
|
| Optional devices |
|
|  | | | Constant loader
| · | Eliminates measurement variation among operators in manual measurement. | | · | The flexible joint system enables precise and reproducible measurement. |
More precise and reproducible measurement may be achieved by using in combination with our Constant Loader (CL-150 series) |
|
|