安规测试仪，数字示波器，TES数字式电容表，电力分析仪，频谱分析仪，台湾固纬，高压探头

有什么疑问请联系我们：0512-68551216 68551217(工作时间:09-00-18:00)   
产品资料
首页 >>> 产品目录 >>> 力学测量仪器 >>> 硬度计
产品[

橡胶硬度计[产品打印页面]

]资料
如果您对该产品感兴趣的话,可以 sendmsg
产品名称: 橡胶硬度计
产品型号: Type EL
产品厂商: 苏州众业电子有限公司1
产品文档: 无相关文档


简单介绍

The ASKER Durometer Type EL for soft rubber (low hardness), as specified by JIS K 6253 and ISO 7619.The application is the same as the standard ASKER Durometer Type CWidely used for measuring soft rubber, sponges, and other foam elastomers, as well as rolled-threads, -films and textile windings (yarn packages).

橡胶硬度计的详细介绍
 Features
橡胶硬度计
Indentor
橡胶硬度计Height: 2.50mm Shape: Spherical
橡胶硬度计
Hardness Tester Selection Chart
橡胶硬度计
橡胶硬度计
Our product line consists of various types of durometers applicable to specific materials
as indicated in the chart above.

Type A Durometer (ASKER A type), conforming to JIS K 6235 is the most popular type of durometer for measuring rubber hardness.

However, verification is recommended because a significant difference is estimated to be the largest when a durometer indicates measurement values from 10 to 90 points.

For hard specimens for which Type A Durometer readings indicate more than 90 points, measurements should be undertaken using the Type D Durometer (ASKER D type). However, for soft specimens with measurements of less than 20 points, the ASKER C type or Type E Durometer (ASKER E type) should be used. The most important consideration in using durometers is to select the correct type for purposes of measurement according to the specimen.
 
Specification
橡胶硬度计
橡胶硬度计
Standards橡胶硬度计JIS K 6253
ISO 7619
橡胶硬度计
Indication range橡胶硬度计0 point - 100 point (262 degree dial scale)
橡胶硬度计
Minimum indication橡胶硬度计1 point (Accuracy : ±1 point)
橡胶硬度计
Indentor Design (mm)橡胶硬度计Height: 2.50 5.00 Dia. Spherical
橡胶硬度计
Spring Forces [mN(g)]橡胶硬度计
0 point:550(56)
橡胶硬度计
橡胶硬度计
橡胶硬度计
100 point:8050(821)
橡胶硬度计
Central hole of diameter of Pressure foot橡胶硬度计Φ5.5
橡胶硬度计
Pressure foot
Dimension (mm)		橡胶硬度计φ16 Longer foot type Length: 18
橡胶硬度计
Outer Dimension (mm)橡胶硬度计Approx. Width 57×Depth 30×Height 94
橡胶硬度计
Weight (g)橡胶硬度计200
橡胶硬度计
Application橡胶硬度计soft rubber, urethane foam, sponge, rolled-threads, film rolls and pottery clay
Outer Dimension (mm)
橡胶硬度计
橡胶硬度计
Outer Dimension (mm)


 
橡胶硬度计Option
橡胶硬度计
橡胶硬度计 橡胶硬度计Two-pointer type (max-hand and active hand) of Rubber Hardness Tester
The stationary set hand (max-hand) makes the maximum value easier to read and allows the creep characteristics of a specimen.

Accurate measurement is made possible for specimens* for which stress relaxation occurs over time or for specimens for which it is difficult to take readings from the front.

*Materials for which the reading decreases immediately after the indentor has been pressed against the surface.
橡胶硬度计
橡胶硬度计 橡胶硬度计Constant Loader for Durometer
·Constant loarder assures uniform test pressure eliminating false readings due to differences between operators in measuring by hand.
·High accuracy and repeatability of the hardness readings are assured by the flexible joint function.
橡胶硬度计
橡胶硬度计 橡胶硬度计Indentor Extension Tester
·The gauge to check the indentor height on a durometer and the reading indicator mechanism.
·Inspection is conducted at 2, 50, and 100 points respectively.
橡胶硬度计
橡胶硬度计 橡胶硬度计Load Tester for Hardness Tester
·Tester to check load properties of the spring on a durometer
·Inspection is conducted at 2, 50, and 75 points respectively.


产品留言
产品目录
数字示波器
示波器无源测棒
示波器差动测棒
示波器高压测棒
示波器电流测棒
高压信号放大器
函数信号发生器
交流变频电源
直流电源供应器
可编程直流电源
频谱分析仪
X射线荧光光谱仪
交流电子负载
直流电子负载
元器件测试仪
数字功率计
功率分析仪
耐压测试仪
安规综合分析仪
绝缘电阻测试仪
接地电阻测试仪
接触电流测试仪
线圈圈数测试仪
数显高压表
线材测试仪
台式型万用表
掌上型万用表
钳形表
温湿度表
数显温度表
红外线测温仪
亮度计
色差仪
照度计
光泽度仪
超声波测厚仪
噪音计
风速仪
转速表
场强测试仪
频率计
PH测试仪
微欧姆表
电池内阻表
多功能较正器
音频信号发生器
网络测量设备
电子测量仪表
电子制程工具
力学测量仪器
气体分析仪器
环境检测仪器
测量工具量仪
测试连接线
温度表附件
示波器附件
友情链接
Copyright© 2003-2012  苏州众业电子有限公司1版权所有  苏ICP备09041849号-1   网站管理入口
网络推广：工控展览网   技术支持：